The keyboard is a must-have component in a PC device used to operate a PC. Keyboards often experience problems with malfunctioning keys or keys inside the keyboard. The keyboard has many buttons that can be used by users to type and operate the operating system. Some of the problems that occur are caused by factors such as (1) exposure to water. It is common knowledge that electronic objects will not co-exist with water. (2) Gross. Because it is rarely cleaned so that the dust settles between the keyboard. (3) The room is too damp.
Before performing a repair on a broken keyboard it helps us perform a damage analysis inside the keyboard.
After finding the damage that occurs on the keyboard start to make improvements such as cleaning on the keyboard. To remove the dirt, try to tilt your keyboard. With the help of a small brush, move your keyboard so that the dust inside the keyboard can come out. Do not forget to turn off your computer first before cleaning the keyboard. After cleaning the dust, clean the bottom and top of the keyboard with masking tape. You can check your keyboard again if all is clean. Restart your computer. If it's just dirty, your keyboard will work properly again.
After restarting your computer, but the button is still there that does not work, then the next step is to open the keyboard that does not work earlier. It could be that the dirt on the button is too stubborn so that it contaminates the inside and will not come out. How to fix the next computer keyboard is to open the keyboard:
Before performing a repair on a broken keyboard it helps us perform a damage analysis inside the keyboard.
- Open the notepad application on your computer.
- Press the shift key on your keyboard. Can shift left or right shift.
- Without releasing the shift, press all the keys on your keyboard.
- Look again at the letters that are not on the page you type.
- If there are characters that are not typed, then that button is not working.
After finding the damage that occurs on the keyboard start to make improvements such as cleaning on the keyboard. To remove the dirt, try to tilt your keyboard. With the help of a small brush, move your keyboard so that the dust inside the keyboard can come out. Do not forget to turn off your computer first before cleaning the keyboard. After cleaning the dust, clean the bottom and top of the keyboard with masking tape. You can check your keyboard again if all is clean. Restart your computer. If it's just dirty, your keyboard will work properly again.
After restarting your computer, but the button is still there that does not work, then the next step is to open the keyboard that does not work earlier. It could be that the dirt on the button is too stubborn so that it contaminates the inside and will not come out. How to fix the next computer keyboard is to open the keyboard:
- Prepare a small sharp cutter. You can buy a new one to get a sharp cutter.
- Remove the broken button and grab the rubber inside.
- There are two layers of carbon under a circular rubber. Torn with a cutter approximately one-third of the carbon layer's circle.
- Usually stubborn dirt between the two layers.
- Clean the dirt using a cutter, but do not damage your keyboard.
- You can swipe the small end of the cutter to clean the dirt on the keyboard. Do not let the carbon also come rubbed. If carbon is lost, then your keyboard will not return to the original.
- After that, the last step try to restart your computer.
Advertisement
No comments